(647) 490-7878
Maytag Dryer repair in Toronto — Appliance Repair Near

Maytag Dryer Repair in Toronto

Fast, honest Maytag dryer repair by Anthony, a Red Seal & 313A licensed technician. Flat $149.95 diagnostic, credited 100% toward your repair.

  • Red Seal Certified
  • $2,000,000+ Insured
  • Warranty
Red Seal Certified
313A & TSSA Licensed
$2,000,000+ Insured
90-Day Warranty

How much does Maytag dryer repair cost in Toronto?

Maytag dryer repair in Toronto typically runs $250$400 all-in, depending on the fault. The most common Maytag call-out is not heating ($250$390). Every visit starts with a flat $149.95 diagnostic, credited 100% toward your repair, and repairs are backed by a warranty.

Diagnostic
$149.95, credited 100% toward your repair
Warranty
on parts & workmanship
Availability
Same-day & next-day appointments available

Prices in CAD for Toronto; typical ranges — your exact quote is confirmed on-site before any work. Updated .

Most Maytag dryer faults in Toronto come down to a handful of parts — and the majority are worth repairing rather than replacing a 10–13 years appliance. Anthony is a Red Seal certified technician who carries the common dryer parts on the van, so most Toronto jobs are diagnosed and fixed in a single visit.

How your repair works

Four simple steps, no surprises.

1

Book

Call or request a callback. Same-day & next-day appointments available.

2

Diagnose

A flat $149.95 diagnostic pinpoints the real fault.

3

Approve

You get an upfront all-in quote first — diagnostic credited 100% toward your repair.

4

Repaired

Fixed with OEM parts, backed by a 90-day warranty.

Maytag dryer parts we stock

Maytag dryers are an era story: post-2007 units are rebadged Whirlpool 29" rear-fuse and 27" Duet-platform machines (identical fuse/element/kit numbers to Whirlpool), while legacy Newton-built Maytags (DE/MDE "Halo of Heat", Performa, Neptune) are a separate, drying-up parts book. The serial tag decides which machine we are actually fixing, but on the modern majority a blown thermal fuse cooked by a clogged vent is THE no-heat story.

Signature Maytag faults

  1. Thermal fuse blown (modern 29" platform) — runs, tumbles, but no heat; root cause is almost always a clogged vent run (most common)
  2. Heating element failure (modern platform) — no heat; element reads open on a meter (common)
  3. Thermal cut-off / high-limit trip (overheat aftermath) — no heat after an overheat event; safeties opened to protect the cabinet (common)
  4. Worn drum rollers / belt / idler (29" maintenance-kit era) — rumble, thump or squeal; drum hard to turn or free-wheels (common)
  5. Gas no-heat: igniter glows then drops out, burner never lights — usually failed gas valve coils (or a weak igniter / dirty flame sensor) (occasional (gas))
Maytag dryer OEM parts — reference numbers & price bands (CAD), June 2026
PartOEM numberPrice band
29" maintenance kit (belt, 2 rollers, idler, tri-rings)4392065$45-$90
Thermal fuse (196F/91C, blower housing)3392519$15-$30
Heating element (240V / 5400W)279838 (PS334313)$70-$130
Thermal cut-off kit (cutoff fuse + high-limit thermostat)279973$30-$55
Gas igniter / valve coil set (gas models)279311 / 279834$45-$110

Error codes we see on Maytag dryers

AF / F4E3
restricted airflow - clogged lint screen or vent, or crushed/kinked exhaust (Maytag official); clear the FULL vent run, not just the filter
L2
low or no line voltage - one 240V leg down, so the heater can't turn on; breaker/cord/terminal-block check first (Maytag official)
PF
power failure - the drying cycle was interrupted by a loss of power; restart the cycle (Maytag official)
F01
main electronic control board fault (internal main-relay short) on Bravos XL / Centennial electronic models; power down via breaker for ~5-10 min, then replace the main control board if it returns

Why homeowners across Toronto call us

Repairs are carried out by Anthony, a Red Seal interprovincial journeyman who is 313A Licensed, TSSA Certified, ODP Certified — backed by $2,000,000+ general liability insurance and a 90-day workmanship warranty on every job.

Red Seal technician

Work done by Anthony, a certified journeyman — not a rotating subcontractor.

Licensed & gas-certified

313A refrigeration licence and TSSA gas certification for safe, code-correct repairs.

$2,000,000+ insured

Fully insured for general liability, so your home is protected during the repair.

90-day warranty

Parts and workmanship are warrantied — if it's not right, we come back.

OEM parts on the van

Common parts are stocked, so most jobs are completed on the first visit.

Upfront pricing

A flat $149.95 diagnostic, credited 100% toward your repair, and a quote before any work.

What our credentials mean for you

Red Seal Certified
The interprovincial standard for skilled trades — a journeyman who passed the national appliance-service exam.
313A Licensed
Ontario's refrigeration & air-conditioning systems mechanic licence — legally required to work on sealed cooling systems.
TSSA Certified
Technical Standards & Safety Authority gas certification — qualified to work safely on gas appliances.
ODP Certified
Ozone Depletion Prevention certification — licensed to handle refrigerants responsibly and to code.

Servicing Dryers across Toronto

Maytag dryer service in Toronto — the local specifics

  • Modern Maytag dryers ride the Whirlpool W10/WP catalogue, the deepest-stocked dryer parts pipeline in the GTA, so the routine no-heat work closes fast: on the modern 29" platform the 3392519 thermal fuse and 279973 thermal cut-off kit are common-failure safety parts that sit on the van and on every Toronto trade counter, so most no-heat calls are one-visit. When the element itself reads open, the 279838 (PS334313) heating element (240V/5400W) is a stocked-channel item, and on gas units the 279311 igniter and 279834 valve-coil set are the same fast-movers, so those are same-day or next-day once the failure mode is confirmed on site. The 4392065 29" maintenance kit (belt, idler and drum rollers) rides along for the rumble-and-squeal calls. Because Maytag spans the 29" rear-fuse and 27" Duet chassis, we decode the model and serial before ordering so the platform gets the right part.
  • Open channel here: the no-heat fast-movers — the 3392519 thermal fuse, 279973 cut-off kit, the 279838 (PS334313) element and the gas 279834 coil set plus the 279311 igniter — all pull through GTA Whirlpool-channel distributors and the national OEM houses as shelf stock, and the 4392065 maintenance kit is a catalogued Maytag accessory. One Toronto trade-counter pull covers the badge on the machine, since Whirlpool, Maytag, Amana, Inglis and the relevant Kenmore units share this same parts book. The slower line is legacy: pre-2007 Newton-built Maytag (DE/MDE, Performa, Neptune) dryer parts are increasingly NLA and become order-in or an honest repair-vs-replace call, so we confirm the model and serial before the truck rolls rather than guess the platform.
  • Toronto's older housing stock is the real driver behind the no-heat calls: long, hidden basement vent runs and rigid duct snaking up through finished ceilings in semis and rowhouses choke airflow and cook the 3392519 fuse, and condo stacked-laundry closets add crushed flex behind a tight install — so we treat the vent as part of the job, because a fuse fitted without clearing the run is a guaranteed callback. Electric Maytag dryers need a confirmed dedicated 240V circuit, and a 30A laundry breaker that keeps tripping is an electrical condition to diagnose before any heater swap, not a part. Gas Maytag units are TSSA-certified work on a natural-gas line; we confirm the appliance is set up for natural gas rather than propane before opening the burner, since the 279834 coil set and 279311 igniter live in that gas train.

Parts & timing: Common parts typically same-day via Scarborough and North York distributor branches.

Costs for every common fault, plus the full coverage map and disposal rules, live on dryer repair in Toronto and the Toronto hub.

Frequently asked questions

How fast can you repair my Dryer in Toronto?
We offer same-day and next-day Dryer repair across Toronto with OEM parts stocked for first-visit fixes.
Do you charge for the diagnostic?
The diagnostic is a flat $149.95, and it is credited 100% toward your repair — so if you go ahead with the fix, it isn't an extra charge.
How soon can you come out?
Same-day & next-day appointments available across Toronto. Call (647) 490-7878 and we'll give you the next available slot.
Are you licensed and insured?
Yes. Repairs are performed by Anthony, who is Red Seal Certified, 313A Licensed, TSSA Certified, ODP Certified, and the work is backed by $2,000,000+ general liability insurance and a 90-day warranty.
Do you use genuine parts?
Yes — we fit OEM parts and stock the common ones on the van, so most repairs are completed in a single visit.
Do you service Maytag dryers?
Yes — Maytag dryers are one of the brands we work on across Toronto, with OEM parts stocked for first-visit fixes.

Need your Maytag dryer fixed in Toronto?

Same-day & next-day appointments available. Flat $149.95 diagnostic, credited 100% toward your repair, and a 90-day warranty on every repair.

Call (647) 490-7878
Call now Callback