(647) 490-7878
Electrolux Dryer repair in Toronto — Appliance Repair Near

Electrolux Dryer Repair in Toronto

Fast, honest Electrolux dryer repair by Anthony, a Red Seal & 313A licensed technician. Flat $149.95 diagnostic, credited 100% toward your repair.

  • Red Seal Certified
  • $2,000,000+ Insured
  • Warranty
Red Seal Certified
313A & TSSA Licensed
$2,000,000+ Insured
90-Day Warranty

How much does Electrolux dryer repair cost in Toronto?

Electrolux dryer repair in Toronto typically runs $250$400 all-in, depending on the fault. The most common Electrolux call-out is not heating ($250$390). Every visit starts with a flat $149.95 diagnostic, credited 100% toward your repair, and repairs are backed by a warranty.

Diagnostic
$149.95, credited 100% toward your repair
Warranty
on parts & workmanship
Availability
Same-day & next-day appointments available

Prices in CAD for Toronto; typical ranges — your exact quote is confirmed on-site before any work. Updated .

Most Electrolux dryer faults in Toronto come down to a handful of parts — and the majority are worth repairing rather than replacing a 10–13 years appliance. Anthony is a Red Seal certified technician who carries the common dryer parts on the van, so most Toronto jobs are diagnosed and fixed in a single visit.

How your repair works

Four simple steps, no surprises.

1

Book

Call or request a callback. Same-day & next-day appointments available.

2

Diagnose

A flat $149.95 diagnostic pinpoints the real fault.

3

Approve

You get an upfront all-in quote first — diagnostic credited 100% toward your repair.

4

Repaired

Fixed with OEM parts, backed by a 90-day warranty.

Electrolux dryer parts we stock

Electrolux-branded dryers (EFME/ELFE 8-series, the Perfect Steam / Luxury-Care line) wear Frigidaire's element-and-belt mechanicals underneath and carry the same E6x heater/sensor code family Frigidaire uses on the shared North-American control platform (a code set with roots in Electrolux's European AEG/Zanussi ENV-board family) — the E-codes are NOT what separates the two brands. E64 (heater open circuit) leads, but Perfect Steam plumbing and the moisture-sensing board add steam-valve and predictive-dry faults Frigidaire units simply do not have.

Signature Electrolux faults

  1. Heating element / heater open circuit (E64) — no heat; code stored on the E6x family (most common)
  2. Perfect Steam water-valve & nozzle faults — no steam, damp/wrinkled finish, or a wet floor behind the unit (platform-distinct (no Frigidaire equivalent))
  3. Predictive-Dry / moisture-sensing board faults — cycle stops damp or over-dries despite clean sensor strips (common on the premium board)
  4. Belt, idler & glide wear (shared chassis) — squeal / free-wheel (common)
Electrolux dryer OEM parts — reference numbers & price bands (CAD), June 2026
PartOEM numberPrice band
Heating element137114000$110$190
Perfect Steam water inlet (mist) valve137544800$120$200
Moisture/predictive-dry sensor harness134786100$30$70
Drive belt134503600$15$30

Error codes we see on Electrolux dryers

E64
heater open circuit — element or heater wiring (the E6x family lead)
E61 / E62 / E63
heater relay / heat-circuit faults in the same European-rooted family
E65 / E66 / E67
over-temperature / sensor faults in the same family
E5x
Perfect Steam water-circuit faults (steam models)

Why homeowners across Toronto call us

Repairs are carried out by Anthony, a Red Seal interprovincial journeyman who is 313A Licensed, TSSA Certified, ODP Certified — backed by $2,000,000+ general liability insurance and a 90-day workmanship warranty on every job.

Red Seal technician

Work done by Anthony, a certified journeyman — not a rotating subcontractor.

Licensed & gas-certified

313A refrigeration licence and TSSA gas certification for safe, code-correct repairs.

$2,000,000+ insured

Fully insured for general liability, so your home is protected during the repair.

90-day warranty

Parts and workmanship are warrantied — if it's not right, we come back.

OEM parts on the van

Common parts are stocked, so most jobs are completed on the first visit.

Upfront pricing

A flat $149.95 diagnostic, credited 100% toward your repair, and a quote before any work.

What our credentials mean for you

Red Seal Certified
The interprovincial standard for skilled trades — a journeyman who passed the national appliance-service exam.
313A Licensed
Ontario's refrigeration & air-conditioning systems mechanic licence — legally required to work on sealed cooling systems.
TSSA Certified
Technical Standards & Safety Authority gas certification — qualified to work safely on gas appliances.
ODP Certified
Ozone Depletion Prevention certification — licensed to handle refrigerants responsibly and to code.

Servicing Dryers across Toronto

Electrolux dryer service in Toronto — the local specifics

  • Electrolux dryers ride the shared Frigidaire/Electrolux NA parts channel, which is the deepest-stocked premium laundry pipeline in the GTA — the not-heating wear parts (137114000 element, 137032600 thermal fuse, 3204267 high-limit, 134587700 thermistor) are routinely same-day or next-day off Toronto distributor shelves, so most E64/E65/E66 calls close in one visit.
  • Heating element (137114000 / 134792700 family), the 137032600 inlet thermal fuse and 3204267 high-limit thermostat, and the 134587700 control thermistor stock locally through the Frigidaire/Electrolux channel and GTA aftermarket houses. The 137544800 Perfect Steam inlet/mist valve is the slower line — model-coded and not every counter carries it, so we confirm it by model/serial before the truck rolls.
  • Toronto's housing stock drives the airflow faults behind E65/E66: long, kinked, or lint-packed vent runs in older homes and condo stacks are the real cause of the overheat that opens the high-limit and thermal fuse. And because Perfect Steam units need a cold-water line teed off the washer supply behind the dryer, tight Toronto laundry closets mean a 'damp finish' here is often a never-connected or kinked steam line, not the heater.

Parts & timing: Common parts typically same-day via Scarborough and North York distributor branches.

Costs for every common fault, plus the full coverage map and disposal rules, live on dryer repair in Toronto and the Toronto hub.

Frequently asked questions

How fast can you repair my Dryer in Toronto?
We offer same-day and next-day Dryer repair across Toronto with OEM parts stocked for first-visit fixes.
Do you charge for the diagnostic?
The diagnostic is a flat $149.95, and it is credited 100% toward your repair — so if you go ahead with the fix, it isn't an extra charge.
How soon can you come out?
Same-day & next-day appointments available across Toronto. Call (647) 490-7878 and we'll give you the next available slot.
Are you licensed and insured?
Yes. Repairs are performed by Anthony, who is Red Seal Certified, 313A Licensed, TSSA Certified, ODP Certified, and the work is backed by $2,000,000+ general liability insurance and a 90-day warranty.
Do you use genuine parts?
Yes — we fit OEM parts and stock the common ones on the van, so most repairs are completed in a single visit.
Do you service Electrolux dryers?
Yes — Electrolux dryers are one of the brands we work on across Toronto, with OEM parts stocked for first-visit fixes.

Need your Electrolux dryer fixed in Toronto?

Same-day & next-day appointments available. Flat $149.95 diagnostic, credited 100% toward your repair, and a 90-day warranty on every repair.

Call (647) 490-7878
Call now Callback