How much does Dacor stove repair cost in Toronto?
Dacor stove repair in Toronto typically runs $140–$520 all-in, depending on the fault. The most common Dacor call-out is gas burner clicks constantly ($150–$330). Every visit starts with a flat $149.95 diagnostic, credited 100% toward your repair, and repairs are backed by a warranty.
- Diagnostic
- $149.95, credited 100% toward your repair
- Warranty
- on parts & workmanship
- Availability
- Same-day & next-day appointments available
Prices in CAD for Toronto; typical ranges — your exact quote is confirmed on-site before any work. Updated .
Most Dacor stove faults in Toronto come down to a handful of parts — and the majority are worth repairing rather than replacing a 13–15 years appliance. Anthony is a Red Seal certified technician who carries the common stove parts on the van, so most Toronto jobs are diagnosed and fixed in a single visit.
How your repair works
Four simple steps, no surprises.
Book
Call or request a callback. Same-day & next-day appointments available.
Diagnose
A flat $149.95 diagnostic pinpoints the real fault.
Approve
You get an upfront all-in quote first — diagnostic credited 100% toward your repair.
Repaired
Fixed with OEM parts, backed by a 90-day warranty.
Dacor stove parts we stock
Dacor pro-style ranges, rangetops and cooktops (Heritage/Renaissance ER & HDPR legacy, Samsung-era Modernist DOP/HGPR) are sealed-burner gas and dual-fuel luxury units, so the dominant call is surface-burner spark ignition: a shared multi-point re-ignition module pulsing every electrode, cracked/fouled spark electrodes, and contaminated igniter switches behind the knobs. The gas oven hot-surface igniter fault applies only to ALL-GAS models (HGPR) — dual-fuel ER/HDPR/DOP ranges have an ELECTRIC oven (bake/broil element, RapidHeat), so their oven failures are element/relay/sensor, not an igniter. Parts cross two eras — legacy Dacor numbers (86526, 72164, 103789) and Samsung DE81-prefix supersessions on newer platforms — and are authorized-distributor-gated (dacorpartsdirect/reliableparts/encompass). All gas-burner, valve, orifice and NG/LP conversion work is TSSA gas-fitter scope.
Signature Dacor faults
- Surface spark electrode failure — one burner clicks but won't light, or weak/misplaced spark (most common)
- Re-ignition spark module fault — all burners click together or none spark; constant clicking (common)
- Burner igniter switch contamination (behind knob) — one position dead, no click; or constant clicking after a spill (common)
- Gas oven hot-surface igniter weakening (all-gas HGPR only) — long preheat then no bake; intermittent or slow broil (most common (all-gas oven))
- NG/LP orifice or gas-type mismatch — weak/lazy yellow flame, hard ignition after a move or conversion (occasional)
| Part | OEM number | Price band |
|---|---|---|
| Surface spark electrode (legacy; supersedes to DE81-08766A) | 72164 | $30–$90 |
| Spark / re-ignition module, 4-point (legacy; Samsung DE81-03926A) | 86526 | $180–$300 |
| Cooktop burner igniter switch (OEM; supersedes DE81-07625A) | 103789 | $60–$140 |
| Gas oven hot-surface igniter, all-gas (Samsung-era; supersedes 82473) | DE81-07046A | $120–$200 |
| Spark module, 5-point, legacy SGM/SGG-series ranges (Samsung DE81-03927A, supersedes 86527) | DE81-03927A | $170–$290 |
| Nat-to-LP conversion kit (orifices) | 86151K | $90–$180 |
Error codes we see on Dacor stoves
- F0
- function/touch key stuck — pad or clock-integrated control replaced
- F1
- system watchdog circuit fault — replace main control (ERC)
- F2
- heating-mode high temperature / runaway — check sensor, wiring, relays; stop using oven
- F3
- shorted oven temperature sensor (RTD) — inspect harness, replace sensor
- F4
- open oven temperature sensor (RTD) — inspect harness, replace sensor
- F9
- oven door-lock circuit error
Why homeowners across Toronto call us
Repairs are carried out by Anthony, a Red Seal interprovincial journeyman who is 313A Licensed, TSSA Certified, ODP Certified — backed by $2,000,000+ general liability insurance and a 90-day workmanship warranty on every job.
Red Seal technician
Work done by Anthony, a certified journeyman — not a rotating subcontractor.
Licensed & gas-certified
313A refrigeration licence and TSSA gas certification for safe, code-correct repairs.
$2,000,000+ insured
Fully insured for general liability, so your home is protected during the repair.
90-day warranty
Parts and workmanship are warrantied — if it's not right, we come back.
OEM parts on the van
Common parts are stocked, so most jobs are completed on the first visit.
Upfront pricing
A flat $149.95 diagnostic, credited 100% toward your repair, and a quote before any work.
What our credentials mean for you
- Red Seal Certified
- The interprovincial standard for skilled trades — a journeyman who passed the national appliance-service exam.
- 313A Licensed
- Ontario's refrigeration & air-conditioning systems mechanic licence — legally required to work on sealed cooling systems.
- TSSA Certified
- Technical Standards & Safety Authority gas certification — qualified to work safely on gas appliances.
- ODP Certified
- Ozone Depletion Prevention certification — licensed to handle refrigerants responsibly and to code.
Servicing Stoves across Toronto
Dacor stove service in Toronto — the local specifics
- Dacor ignition parts run through the authorized distributor channel (Reliable Parts Canada / Encompass / the national OEM houses), and stock is genuinely split part-by-part. The all-gas HGPR oven hot-surface igniter, DE81-07046A (supersedes 82473), is a confirmed ready-to-ship stocked line at Reliable Parts Canada and Home Depot Canada, and the 103789 / DE81-07625A cooktop igniter switch is an inexpensive, widely-stocked same-day line, so a slow-preheat no-bake or a single dead burner position on those is usually a quick turnaround. The 4-point surface re-ignition module 86526 (supersedes Samsung DE81-03926A) and the 72164 / DE81-08766A spark electrode are real open-channel parts but currently move slower in the Canadian channel — 86526 shows not-in-stock at Reliable Parts Canada and "no longer available" at Encompass, with supply mainly through US OEM aggregators — so a module-fault cooktop call is ordered-in against confirmed availability rather than promised same-visit. The one thing we never guess at is era: post-2016 Samsung ownership split the parts book, so we model-decode by serial first — a legacy ER/HDPR unit takes the Dacor number, a newer platform takes the DE81-prefix supersession.
- Open-but-authorized Dacor channel here, with real per-part stock differences rather than a blanket same-day claim. The DE81-07046A all-gas oven hot-surface igniter (supersedes 82473) is a confirmed stocked, ready-to-ship line at Reliable Parts Canada and Home Depot Canada, and the 103789 / DE81-07625A cooktop igniter switch is widely stocked and same-day at the OEM houses. The 86526 / DE81-03926A 4-point spark module and the 72164 / DE81-08766A electrode are genuine open-channel parts but are not reliably in-stock in the Canadian channel right now (86526 shows not-in-stock at Reliable Parts Canada and "no longer available" at Encompass; 72164 is OEM-discontinued and carried via the DE81-08766A supersession), so those are ordered-in against confirmed availability, not carried in-van or promised same-visit; the 5-point module for legacy SGM/SGG cooktops (DE81-03927A, supersedes 86527) is the same channel, order-in. The NG-to-LP orifice conversion is the planned-ahead item: those orifice sets are model-coded — each range (HDPR48S, ER36D, ERSD48, Modernist DOP) has its own kit — and the older generic 86151K kit number is effectively discontinued, so a conversion is ordered against the exact model and serial, not pulled off a shelf.
- Many Toronto Dacor ranges are pro-style 36- or 48-inch slide-ins seated in custom millwork against a tile or stone backsplash, so for any rangetop or cooktop service we plan the pull-out path and gas/electric disconnect before pricing — these are heavy units, and a dual-fuel range also carries an electric oven, so it needs its confirmed dedicated 240V circuit checked alongside the gas line. Gas type matters in the GTA: most city installs run natural gas, but rural and cottage-country properties on propane need the matching orifice set, and a range left on the wrong orifices after a move or conversion shows a weak yellow flame with a perfectly healthy electrode and module — that is a TSSA gas-fitter conversion, not a parts swap, and all burner, valve and orifice work stays in TSSA scope. Constant clicking with the knobs off is almost always a spill or cleaning-water short in a switch or the module rather than a gas fault, so post-spill and post-clean we dry and clean the igniter switches before condemning the 86526 (4-point; DE81-03926A) or DE81-03927A (5-point) module.
Parts & timing: Common parts typically same-day via Scarborough and North York distributor branches.
Costs for every common fault, plus the full coverage map and disposal rules, live on stove repair in Toronto and the Toronto hub.
More appliance repair in Toronto
Brands we service
Other appliances
Nearby cities
Dacor Stove problems in Toronto
Frequently asked questions
How fast can you repair my Stove in Toronto?
Do you charge for the diagnostic?
How soon can you come out?
Are you licensed and insured?
Do you use genuine parts?
Do you service Dacor stoves?
Need your Dacor stove fixed in Toronto?
Same-day & next-day appointments available. Flat $149.95 diagnostic, credited 100% toward your repair, and a 90-day warranty on every repair.
Call (647) 490-7878