How much does Frigidaire stove repair cost in Toronto?
Frigidaire stove repair in Toronto typically runs $140–$520 all-in, depending on the fault. The most common Frigidaire call-out is gas burner clicks but won't light ($150–$300). Every visit starts with a flat $149.95 diagnostic, credited 100% toward your repair, and repairs are backed by a warranty.
- Diagnostic
- $149.95, credited 100% toward your repair
- Warranty
- on parts & workmanship
- Availability
- Same-day & next-day appointments available
Prices in CAD for Toronto; typical ranges — your exact quote is confirmed on-site before any work. Updated .
Most Frigidaire stove faults in Toronto come down to a handful of parts — and the majority are worth repairing rather than replacing a 13–15 years appliance. Anthony is a Red Seal certified technician who carries the common stove parts on the van, so most Toronto jobs are diagnosed and fixed in a single visit.
How your repair works
Four simple steps, no surprises.
Book
Call or request a callback. Same-day & next-day appointments available.
Diagnose
A flat $149.95 diagnostic pinpoints the real fault.
Approve
You get an upfront all-in quote first — diagnostic credited 100% toward your repair.
Repaired
Fixed with OEM parts, backed by a 90-day warranty.
Frigidaire stove parts we stock
Frigidaire/Electrolux ranges speak EOC (electronic oven control) F-codes, and one of them is a safety headline: F10 — runaway temperature — which means the control or the RTD probe is misreading and the oven can overheat unattended. We treat F10 as a stop-use-now call. The famous flat igniter and 316-prefix parts make the routine work economical.
Signature Frigidaire faults
- F10 runaway-temp faults (EOC vs RTD) — oven overheats / self-clean temps uncommanded (safety-priority)
- Gas igniter failures (flat style) — no bake (most common (gas))
- Radiant element & limiter faults — dead burner zones (common (electric))
- F30/F31 sensor opens — no-heat with code (common)
| Part | OEM number | Price band |
|---|---|---|
| Oven temperature probe (RTD) | 316233902 | $25–$50 |
| Flat gas igniter | 316489403 | $40–$80 |
| Electronic oven control (model-coded) | 316418/316557-families | $140–$260 |
| Radiant element | 316464300-family | $60–$120 |
Error codes we see on Frigidaire stoves
- F10
- runaway temperature — discontinue use until repaired
- F11
- stuck key
- F30 / F31
- sensor open / short
- F90-family
- door-lock circuit
Also covers Electrolux: Electrolux ranges share the EOC architecture and 316-prefix ecosystem with Frigidaire — premium trim, same F10-family safety logic. Higher-spec convection hardware joins the usual EOC work.
Why homeowners across Toronto call us
Every repair is led by Anthony, a Red Seal interprovincial journeyman who is 313A Licensed, TSSA Certified, ODP Certified, with his team working under his direct leadership — backed by $2,000,000+ general liability insurance and a 90-day workmanship warranty on every job.
Red Seal-led team
Every job is overseen by Anthony, a certified journeyman, and handled by his own trusted team.
Licensed & gas-certified
313A refrigeration licence and TSSA gas certification for safe, code-correct repairs.
$2,000,000+ insured
Fully insured for general liability, so your home is protected during the repair.
90-day warranty
Parts and workmanship are warrantied — if it's not right, we come back.
OEM parts on the van
Common parts are stocked, so most jobs are completed on the first visit.
Upfront pricing
A flat $149.95 diagnostic, credited 100% toward your repair, and a quote before any work.
What our credentials mean for you
- Red Seal Certified
- The interprovincial standard for skilled trades — a journeyman who passed the national appliance-service exam.
- 313A Licensed
- Ontario's refrigeration & air-conditioning systems mechanic licence — legally required to work on sealed cooling systems.
- TSSA Certified
- Technical Standards & Safety Authority gas certification — qualified to work safely on gas appliances.
- ODP Certified
- Ozone Depletion Prevention certification — licensed to handle refrigerants responsibly and to code.
Servicing Stoves across Toronto
Frigidaire stove service in Toronto — the local specifics
- Frigidaire/Electrolux induction parts move on the 316-prefix mass-market channel plus the newer induction-specific numbers (387404759 / 387761248 coils, 5304524907 main board), so common coil and probe parts are typically next-day from GTA distributors; the model-coded main control board is the one item we confirm stock or order-in before a second visit.
- RTD probes (316233902) and other 316-prefix oven parts sit on local Toronto shelves cheaply; induction surface coils (387404759 140mm RH-rear, 387761248 210mm RH-front) and the 5304524907 control board are stocked by the OEM/aftermarket channel and usually arrive next-day rather than carried in-van. We verify the exact coil position and model suffix (FGIH3047VF vs CGIH3047VF revisions) before pulling a part.
- Toronto kitchens - especially condo and semi installs - frequently put the induction range in a tight cabinet cutout with limited rear airflow; combined with hard-water boil-over residue on the glass, the underside cooling fan and coil connectors collect grime faster, which is why so many 'element dead' calls here resolve at the airflow/connector stage before any coil is replaced.
Parts & timing: Common parts typically same-day via Scarborough and North York distributor branches.
Costs for every common fault, plus the full coverage map and disposal rules, live on stove repair in Toronto and the Toronto hub.
More appliance repair in Toronto
Brands we service
Other appliances
Nearby cities
Frequently asked questions
How fast can you repair my Stove in Toronto?
Do you charge for the diagnostic?
How soon can you come out?
Are you licensed and insured?
Do you use genuine parts?
Do you service Frigidaire stoves?
Need your Frigidaire stove fixed in Toronto?
Same-day & next-day appointments available. Flat $149.95 diagnostic, credited 100% toward your repair, and a 90-day warranty on every repair.
Call (647) 490-7878