Thermador Wall Oven Repair in Toronto

How much does Thermador wall oven repair cost in Toronto?

Thermador wall oven repair in Toronto typically runs $250–$560 all-in, depending on the fault. The most common Thermador call-out is not reaching or holding temperature (uneven baking) ($250–$430). Every visit starts with a flat $149.95 diagnostic, credited 100% toward your repair, and repairs are backed by a 90-day warranty.

Diagnostic: $149.95, credited 100% toward your repair
Warranty: 90-day on parts & workmanship
Availability: Same-day & next-day appointments available

Prices in CAD for Toronto; typical ranges — your exact quote is confirmed on-site before any work. Updated June 2026.

Most Thermador wall oven faults in Toronto come down to a handful of parts — and the majority are worth repairing rather than replacing a 13–15 years appliance. Anthony is a Red Seal certified technician who carries the common wall oven parts on the van, so most Toronto jobs are diagnosed and fixed in a single visit.

How your repair works

Four simple steps, no surprises.

1

Book

Call or request a callback. Same-day & next-day appointments available.

2

Diagnose

A flat $149.95 diagnostic pinpoints the real fault.

3

Approve

You get an upfront all-in quote first — diagnostic credited 100% toward your repair.

4

Repaired

Fixed with OEM parts, backed by a 90-day warranty.

Thermador wall oven parts we stock

Thermador wall ovens (Masterpiece ME/MED, Professional PO/POD) are BSH luxury-cooking siblings of the Bosch wall-oven line — same 00-prefix 10-digit parts and the same BSH E-code electronics, in larger formats with heavy multi-pane doors and, on the "D"-suffix variants (MED/POD), a side-swing premium door that is a genuinely different handling job. The service profile concentrates on the bake/broil element (the most common no-heat fault), the relay control board (the documented "won't reach temperature / exceeds setpoint or won't shut off" fault), the convection element, the grease-prone NTC temperature sensor, the heavy door-hinge/glass system, and self-clean door-lock aftermath; cooking parts are BSH-channel, frequently dealer-ordered by model/serial, and gas work is TSSA-scoped.

Signature Thermador faults

Bake or broil element open-circuit — no heat or slow heat in bake/broil; element measures open or out of range (most common)
Relay control board fault (won't reach temp / exceeds setpoint or won't shut off) — oven undershoots, overshoots, or won't turn off; dim/erratic display (signature fault)
Door hinge / heavy multi-pane glass system wear — door sag, pane rattle, heat leak; side-swing handling hazard on MED/POD (platform-distinct)
Oven temperature sensor (NTC) drift or short — undershoots setpoint, E101/E104/E201/E204 sensor codes, often grease-fouled (common)
Self-clean door-lock motor / latch aftermath — door stays locked after self-clean; E106/E107 (E206/E207) latch codes (classic pattern)

Thermador wall oven OEM parts — reference numbers & price bands (CAD), June 2026
Part	OEM number	Price band
Bottom bake element, 30" (~22"; replaces 1028908 / 14-38-443 / PS8704893; 27" cavity = 00367649)	`00367648`	$110–$190
Relay control board ('won't reach temp / exceeds setpoint or won't turn off'; pairs with display board 00702450/00702451)	`00492069`	$260–$440
Oven control board (single oven: display + relay; double-oven variant = 00702451; AP4929088)	`00702450`	$340–$560
Oven temperature sensor / NTC probe (~1080Ω at 70F; legacy cross-ref 14-31-276-01 / 35-00-306; OEM discontinued on many models — confirm OEM-equivalent by model/serial)	`00414152`	$70–$130
Convection element (replaces 1026108 / 14-38-445 / PS3468210 / PS8718507)	`00484787`	$120–$210
Door lock motor & latch assembly (self-clean latch; E106/E107 latch codes; Bosch/Gaggenau sibling)	`00751505`	$230–$340

Error codes we see on Thermador wall ovens

E011: Oven temperature-sensor (NTC) circuit fault — in the same family as the E101/E104 upper-oven and E201/E204 lower-oven sensor codes, not a control-panel/key fault. Clean the probe tip and harness (grease contamination is common) and re-meter the NTC (~1080Ω at 70F) before condemning sensor 00414152; replace the electronic control board only if a known-good probe still codes
E101 / E104: Upper-oven (Cvt 1) temperature sensor: E101 = sensor open, E104 = sensor shorted. Reseat harness and re-meter the probe (~1080Ω at 70F); replace sensor 00414152 first and the electronic control board only if a known-good probe still codes. Often grease contamination at the probe tip — clean and re-test before condemning the part
E201 / E204: Lower-oven (Cvt 2) temperature sensor: E201 = sensor open, E204 = sensor shorted. Same diagnostic path as the upper-oven E101/E104 pair, applied to the lower cavity
E106 / E206: Door latch does not lock (E106 upper / E206 lower) — the self-clean latch will not engage. Points at the lock motor & latch assembly 00751505, not an element or main board
E107 / E207: Door latch does not unlock (E107 upper / E207 lower) — door stays locked after self-clean; verify lock motor and the door-latch switch before condemning the control
E126 / E226: Door latch error / undefined state — the door switch and the door-latch switch disagree. Check the wire harness at both switches, then the latch assembly 00751505; replace the control board only if the latch and switches check out

Thermador notes

Side-opening ("D"-suffix) doors — Masterpiece MED and Professional POD — are a two-tech handling job: the heavy hinged multi-pane glass system is the platform-distinct hazard, aligned differently than a drop-down door.
The relay board (00492069) and the main/display board (00702450/00702451) are separate parts: an AC-voltmeter check at the element terminals during bake/broil/convection isolates a dead relay before any four-figure board is condemned.
Each heat circuit is its own path — an oven that bakes fine but won't come up to temp in convection points at the convection element 00484787 or its dedicated relay channel, not the bake element.
Holiday rule we repeat all November: run self-clean weeks before the dinner, never the night before — pyrolytic heat is when the door-lock (E106/E107) and sensor faults surface.
Sensor codes E101/E104/E201/E204 are very often grease at the probe tip — clean and re-meter (~1080Ω at 70F) before ordering the (discontinued) 00414152, since a cleaned sensor sometimes recovers and saves the part.
E011 belongs to the oven temperature-sensor family (alongside E101/E104/E201/E204), not the control panel — clean and re-meter the NTC (~1080Ω at 70F) before condemning the sensor, since a grease-fouled probe often recovers.
00414152 (wall-oven sensor, AP2831584) is a DIFFERENT part from 00627375 (pro-range sensor, AP5657293): the two have separate supersession chains and are not interchangeable by part number — match the sensor to the Thermador model tag, never swap the two.

Model families: Masterpiece ME / MED (single & double; MED = side-opening door) · Professional PO / POD (single & double; POD = side-opening door) · Masterpiece combination steam/speed ovens · built-in column pairings with Thermador warming drawers

Warranty check: Premium BSH/Thermador factory terms on registered units — check registration before quoting any board or element.

Availability: BSH/Thermador channel (00-prefix 10-digit; Bosch-built wall-oven hardware); elements and sensors orderable, relay & control boards and premium trim frequently dealer-ordered by model/serial, rarely shelf-stocked — confirm the part against the Thermador model tag, not a Bosch lookup. These are OEM reference numbers — exact fitment is confirmed against your model and serial on-site.

Why homeowners across Toronto call us

Repairs are carried out by Anthony, a Red Seal interprovincial journeyman who is 313A Licensed, TSSA Certified, ODP Certified — backed by $2,000,000+ general liability insurance and a 90-day workmanship warranty on every job.

Red Seal technician

Work done by Anthony, a certified journeyman — not a rotating subcontractor.

Licensed & gas-certified

313A refrigeration licence and TSSA gas certification for safe, code-correct repairs.

$2,000,000+ insured

Fully insured for general liability, so your home is protected during the repair.

90-day warranty

Parts and workmanship are warrantied — if it's not right, we come back.

OEM parts on the van

Common parts are stocked, so most jobs are completed on the first visit.

Upfront pricing

A flat $149.95 diagnostic, credited 100% toward your repair, and a quote before any work.

What our credentials mean for you

Red Seal Certified: The interprovincial standard for skilled trades — a journeyman who passed the national appliance-service exam.
313A Licensed: Ontario's refrigeration & air-conditioning systems mechanic licence — legally required to work on sealed cooling systems.
TSSA Certified: Technical Standards & Safety Authority gas certification — qualified to work safely on gas appliances.
ODP Certified: Ozone Depletion Prevention certification — licensed to handle refrigerants responsibly and to code.

Servicing Wall Ovens across Toronto

Thermador wall oven service in Toronto — the local specifics

Thermador oven parts move through the BSH channel, not off a Toronto shelf — elements (00367648/00367649) and oven temperature sensors (00414152) are usually 1-3 business days into the GTA, while relay/control boards (00492069, 00702450/00702451) are model-coded and ordered after a model-tag lookup. We confirm the model and serial on the first visit so the correct revision board ships once, instead of a guessed part arriving twice.
Common across the BSH cooking line, the bake/convection elements and oven temperature sensors are the parts most likely to be held by GTA BSH distributors and the faster-moving 00-prefix catalogue items; relay and main control boards are typically dealer/distributor-ordered rather than stocked, and a remanufactured-board path exists for the 00492069 relay board when a new-board lead time is long.
Many Toronto Thermador wall ovens are 30" Masterpiece or 24" Euro-format columns built into tall cabinet stacks in newer condos and renovated homes; pulling the oven to reach the rear relay board and element terminals is a tight cabinet-extraction job, and Masterpiece side-swing doors are heavy enough to be a two-tech handling task on install.

Parts & timing: Common parts typically same-day via Scarborough and North York distributor branches.

Costs for every common fault, plus the full coverage map and disposal rules, live on wall oven repair in Toronto and the Toronto hub.

More appliance repair in Toronto

Brands we service

Whirlpool Wall Oven Samsung Wall Oven GE Wall Oven Frigidaire Wall Oven KitchenAid Wall Oven Bosch Wall Oven Miele Wall Oven Wolf Wall Oven Dacor Wall Oven Viking Wall Oven

Other appliances

Refrigerator Repair Dryer Repair Washing Machine Repair Dishwasher Repair Stove Repair

Nearby cities

Thermador Wall Oven problems in Toronto

Oven not heating at all Not reaching or holding temperature (uneven baking)Gas oven won't ignite (igniter glows weakly)Oven temperature inaccurate Self-clean won't start, or door locked after self-clean

Frequently asked questions

How fast can you repair my Wall Oven in Toronto?

We offer same-day and next-day Wall Oven repair across Toronto with OEM parts stocked for first-visit fixes.

Do you charge for the diagnostic?

The diagnostic is a flat $149.95, and it is credited 100% toward your repair — so if you go ahead with the fix, it isn't an extra charge.

How soon can you come out?

Same-day & next-day appointments available across Toronto. Call (647) 490-7878 and we'll give you the next available slot.

Are you licensed and insured?

Yes. Repairs are performed by Anthony, who is Red Seal Certified, 313A Licensed, TSSA Certified, ODP Certified, and the work is backed by $2,000,000+ general liability insurance and a 90-day warranty.

Do you use genuine parts?

Yes — we fit OEM parts and stock the common ones on the van, so most repairs are completed in a single visit.

Do you service Thermador wall ovens?

Yes — Thermador wall ovens are one of the brands we work on across Toronto, with OEM parts stocked for first-visit fixes.

Need your Thermador wall oven fixed in Toronto?

Same-day & next-day appointments available. Flat $149.95 diagnostic, credited 100% toward your repair, and a 90-day warranty on every repair.

Call (647) 490-7878