Kenmore Dishwasher Repair in Toronto

How much does Kenmore dishwasher repair cost in Toronto?

Kenmore dishwasher repair in Toronto typically runs $180–$510 all-in, depending on the fault. The most common Kenmore call-out is not draining / standing water ($200–$390). Every visit starts with a flat $149.95 diagnostic, credited 100% toward your repair, and repairs are backed by a 90-day warranty.

Diagnostic: $149.95, credited 100% toward your repair
Warranty: 90-day on parts & workmanship
Availability: Same-day & next-day appointments available

Prices in CAD for Toronto; typical ranges — your exact quote is confirmed on-site before any work. Updated June 2026.

Most Kenmore dishwasher faults in Toronto come down to a handful of parts — and the majority are worth repairing rather than replacing an appliance that typically lasts 9–12 years. Anthony is a Red Seal certified technician who carries the common dishwasher parts on the van, so most jobs in Toronto are diagnosed and fixed in a single visit.

How your repair works

Four simple steps, no surprises.

1

Book

Call or request a callback. Same-day & next-day appointments available.

2

Diagnose

A flat $149.95 diagnostic pinpoints the real fault.

3

Approve

You get an upfront all-in quote first — diagnostic credited 100% toward your repair.

4

Repaired

Fixed with OEM parts, backed by a 90-day warranty.

Kenmore dishwasher parts we stock

"Kenmore" is a Sears retail badge, not a factory: the real maker is decoded from the FIRST 3 DIGITS of the model number (the prefix before the dot on the data-plate). We read the full model/serial before the visit, then diagnose as the actual donor. The dominant dishwasher prefixes are web-confirmed: 665. = WHIRLPOOL-built tall-tubs — fixed with the same chopper/diverter/thermal-fuse/door-latch and clean-light blink-code knowledge as Whirlpool/KitchenAid/Maytag; 587. = FRIGIDAIRE/Electrolux-built — i-code dialect (i10/i20/i30/i40) and cheap 154-prefix parts; 630. = BOSCH/BSH-built (E-code logic); 795. = LG-built (QuadWash platform, shares LG OE/AE codes and ABQ-prefix pumps); 363./364. = GE-built. For dishwashers the LG prefix is 795. ONLY — 796. is the LG LAUNDRY (washer/dryer) prefix and is NOT a dishwasher number, so we never import it into the dishwasher decode. On 665 we go with WHIRLPOOL per the parts-industry authority ApplianceAid and a real Whirlpool model example (665.1574990) — we decode the plate rather than trust the badge (and we ignore the stale '363/364/665=GE' lump-list, which is wrong for dishwashers: 665 dishwashers are Whirlpool, with Whirlpool parts and Whirlpool blink-code diagnostics). Kenmore parts ARE the donor's parts: we never order a "Kenmore" number, we order the donor's OEM number cross-referenced to the 665./587./630./795. prefix.

Signature Kenmore faults

665. Whirlpool-built drain & door-latch faults — standing water at cycle end, or lights on but won't start (worn latch switches) (most common)
665. Whirlpool-built no-start: control-board thermal fuse opens — panel may flash briefly then dead, no cycle runs; fuse blown after an overheat (known pattern)
587. Frigidaire-built i-code faults (i10 fill / i20/i40 clog / i30 base-pan leak) — no/slow fill, poor wash, or stop-and-drain leak lockout (per-platform (587.))
630. Bosch/BSH-built faults follow Bosch E-code logic — E15 base-pan trip, E24 drain — diagnosed as Bosch once decoded (per-platform (630.))
795. LG-built OE drain / AE leak faults — standing water (OE) or continuous protective drain (AE) — LG QuadWash profile (per-platform (795.))

Kenmore dishwasher OEM parts — reference numbers & price bands (CAD), June 2026
Part	OEM number	Price band
Whirlpool-built (665.) drain pump — standing-water/not-draining	`W10348269`	$95–$190
Whirlpool-built (665.) thermal-fuse kit — control-board no-start	`8193762`	$45–$95
Whirlpool-built (665.) door latch & switch assembly — lights-on won't-start	`WPW10653840`	$55–$110
Frigidaire-built (587.) water inlet valve — i10 no/slow fill	`154637401`	$45–$90
Frigidaire-built (587.) drain pump — i20/i30 drain fault	`154580301`	$60–$110

Error codes we see on Kenmore dishwashers

665. (Whirlpool-built) clean-light blink codes — e.g. 7 blinks = flow-meter/inlet, no water sensed (or heater circuit, by model): Whirlpool diagnostic language; enter via Heated Dry → Normal Wash → Heated Dry → Normal Wash
587. (Frigidaire-built) i30: leak/overflow water detected in the base pan — Frigidaire anti-flood float trip; dry the pan, find the path
587. (Frigidaire-built) i10 / i20 / i40: i10 fill fault, i20 did-not-drain, i40 clogged filter/sump or leak-detect — Frigidaire i-code dialect
630. (Bosch/BSH-built) E15: Aquastop / water-in-base trip — Bosch language on the 630. donor

Kenmore notes

Read the data-plate prefix first — the first 3 digits before the dot decode the maker: 665.=Whirlpool, 587.=Frigidaire/Electrolux, 630.=Bosch/BSH, 795.=LG, 363./364.=GE. For dishwashers the LG prefix is 795. only; 796. is the LG LAUNDRY prefix (washer/dryer) and never a dishwasher — don't cross-contaminate the decode. We never order a 'Kenmore' part number; Kenmore parts ARE the donor's OEM parts cross-referenced to the prefix.
On 665 we go with Whirlpool per ApplianceAid and a real Whirlpool model (665.1574990) — we trust the decode, not the badge. The stale '363/364/665=GE' lump-list is a known error for dishwashers: 665 dishwashers are Whirlpool (Whirlpool parts, Whirlpool blink codes), while 363./364. genuinely are the GE-built dishwasher families.
Diagnostic-mode entry differs by donor: Whirlpool 665. uses Heated Dry → Normal Wash → Heated Dry → Normal Wash within ~8s (clean-light blink codes); Frigidaire 587. uses a two-button hold (e.g. Hi Temp + Air Dry) for 5s — we use the right sequence for the decoded maker.
665. is the most-repaired dishwasher number in the GTA, so its Whirlpool W10-prefix parts are everywhere — which keeps these repairs cheap. Some Kenmore Elite units were BSH-built (630.) and fall under the BSH power-cord recall serial checks, so the decode also gates the recall question.

Model families: 665.xxxxxx Whirlpool-built tall-tub (vast GTA installed base; incl. Elite 665. premium trims) · 587.xxxxxx Frigidaire/Electrolux-built (i-code platform) · 630.xxxxxx Bosch/BSH-built (e.g. 630.13902011) · 795.xxxxxx LG-built (QuadWash platform). 795. is LG's cross-category prefix and does span LG dishwashers; 796. is the LG LAUNDRY prefix (washer/dryer), NOT a dishwasher prefix — do not decode a 796. unit as a dishwasher. · 363./364.xxxxxx GE-built (GE WD-prefix parts and GE fault logic, not Whirlpool blink codes)

Warranty check: Maker-side logic applies.

Safety history: Some Kenmore Elite dishwashers were BSH-built and appeared in the BSH power-cord recalls — the serial check covers it.

Availability: Decode-then-source: we read the model prefix off the plate, then order from the DONOR's channel. 665. parts (Whirlpool W10/WP-prefix) and 587. parts (Frigidaire 154-prefix) are open and same/next-day stocked in the GTA — the single most economical decode because 665. is the most-repaired dishwasher number in the city. 630. (Bosch/BSH) and 795. (LG) route to their own brand channels. These are OEM reference numbers — exact fitment is confirmed against your model and serial on-site.

Why homeowners across Toronto call us

Every repair is led by Anthony, a Red Seal interprovincial journeyman who is 313A Licensed, TSSA Certified, ODP Certified, with his team working under his direct leadership — backed by $2,000,000+ general liability insurance and a 90-day workmanship warranty on every job.

Red Seal-led team

Every job is overseen by Anthony, a certified journeyman, and handled by his own trusted team.

Licensed & gas-certified

313A refrigeration licence and TSSA gas certification for safe, code-correct repairs.

$2,000,000+ insured

Fully insured for general liability, so your home is protected during the repair.

90-day warranty

Parts and workmanship are warrantied — if it's not right, we come back.

OEM parts on the van

Common parts are stocked, so most jobs are completed on the first visit.

Upfront pricing

A flat $149.95 diagnostic, credited 100% toward your repair, and a quote before any work.

What our credentials mean for you

Red Seal Certified: The interprovincial standard for skilled trades — a journeyman who passed the national appliance-service exam.
313A Licensed: Ontario's refrigeration & air-conditioning systems mechanic licence — legally required to work on sealed cooling systems.
TSSA Certified: Technical Standards & Safety Authority gas certification — qualified to work safely on gas appliances.
ODP Certified: Ozone Depletion Prevention certification — licensed to handle refrigerants responsibly and to code.

Servicing Dishwashers across Toronto

Parts & timing: Common parts typically same-day via Scarborough and North York distributor branches.

Costs for every common fault, plus the full coverage map and disposal rules, live on dishwasher repair in Toronto and the Toronto hub.

More appliance repair in Toronto

Frequently asked questions

How fast can you repair my Dishwasher in Toronto?

We offer same-day and next-day Dishwasher repair across Toronto with OEM parts stocked for first-visit fixes.

Do you charge for the diagnostic?

The diagnostic is a flat $149.95, and it is credited 100% toward your repair — so if you go ahead with the fix, it isn't an extra charge.

How soon can you come out?

Same-day & next-day appointments available across Toronto. Call (647) 490-7878 and we'll give you the next available slot.

Are you licensed and insured?

Yes. Repairs are performed by Anthony, who is Red Seal Certified, 313A Licensed, TSSA Certified, ODP Certified, and the work is backed by $2,000,000+ general liability insurance and a 90-day warranty.

Do you use genuine parts?

Yes — we fit OEM parts and stock the common ones on the van, so most repairs are completed in a single visit.

Do you service Kenmore dishwashers?

Yes — Kenmore dishwashers are one of the brands we work on across Toronto, with OEM parts stocked for first-visit fixes.

Need your Kenmore dishwasher fixed in Toronto?

Same-day & next-day appointments available. Flat $149.95 diagnostic, credited 100% toward your repair, and a 90-day warranty on every repair.

Call (647) 490-7878